Automatic Door Repair Toronto

When an automatic door stops working, the problem is immediate – blocked entrances, ADA compliance exposure, and frustrated customers. Delet’s licensed technicians serve Toronto and the GTA 24/7, diagnosing and repairing automatic doors from all major brands in a single visit. Same-day service. Transparent pricing. No disruption to your operations. If your automatic door is not working, call Delet.

Automatic Door broken right now?

Our team offers 24/7 emergency repairs and provides same-day service across Toronto & GTA. Clients trust us to uphold a standard of excellence that is unparalleled to our competitors. We arrive quick – usually within 20-30min and offer free onsite consultation for your repair.

Call Now

Meeting Safety and Compliance

Delet is committed to the highest safety standards and precautions. We adhere to national standards, including the Accessible Canada Act (ADA), fire codes, and building regulations. You can count on our team to comply with safety measures during repairs, such as wearing protective gear and shutting off the power supply to the automatic sliding doors before beginning. We’ll also perform test after the repairs to ensure the doors are functioning at their best.

Automatic Door Types We Service

Every automatic door system has unique components, failure points, and repair requirements. Delet’s technicians are trained across all commercial automatic door formats, not just sliding doors.

Door Type	Common Issues	Typical Repair Time
Automatic Sliding Doors	Sensor misalignment, worn rollers, belt failure, motor burnout	1–3 hours
Automatic Swing Doors	Arm and pivot wear, hydraulic fluid loss, spring failure	1–2 hours
Automatic Revolving Doors	Speed control faults, wing misalignment, motor or drive failures	2–4 hours
Automatic Folding Doors	Track misalignment, panel binding, hydraulic cylinder issues	1–3 hours
Low-Energy Swing Doors	Push-pad malfunctions, delayed closing faults, hold-open failures	1–2 hours
High-Speed Industrial Doors	Curtain damage, sensor loop failure, limit switch issues	2–6 hours

Whatever type of commercial automatic door you operate, Delet carries the diagnostic tools, replacement parts, and brand-specific knowledge to fix it correctly the first time.

Automatic Door Repair Toronto & GTA

Our commercial automatic door repairs guarantee optimal functionality and include:

Hinge Repairs: We can adjust the tension and alignment of the hinges, apply lubricant, or replace the broken hinges.
Crack Sealing: We’ll seal cracks with materials such as vinyl, weatherstripping, or silicone caulk, or replace the affected area.
Door Sensor Repairs: We can fix jammed automatic sliding doors and repair or replace faulty sensors.
Door Frame Repairs: We’ll fix or replace broken frames as well as damaged tracks and motors.
Door Handle Repairs: We lubricate, adjust, or replace handle components to ensure accessibility in the event of emergencies or malfunctioning sensors.

Who We Serve

Delet provides automatic door repair and service across every commercial sector in the GTA:

Hospitals & medical centres: patient-facing entrances, infection control compliance
Grocery stores & retail chains: high-cycle sliding doors, fast turnaround required
Shopping centres & malls: multi-door sites, after-hours service available
Hotels & hospitality: lobby entrances, guest experience sensitive
Office buildings & corporate campuses: access control integration, security compliance
Schools & universities: ACA accessibility compliance, scheduled maintenance
Condominiums & apartment buildings: lobby and parkade automatic doors
Airports & transit hubs: high-traffic, high-consequence entrances
Pharmacies & clinics: continuous operation required
Industrial & warehouse facilities: heavy-duty sliding and automatic doors

Common Issues with Commercial Automatic Doors

Recognizing and addressing problems with your automatic doors is essential because they can pose safety risks. If you notice any of the following issues with your automatic doors, contact Delet for prompt repairs:

Jammed Doors: Automatic door jams can result from door misalignment, debris buildup in the tracks, a damaged motor, and malfunctioning sensors. Jammed automatic doors can interfere with emergency evacuations and response efforts in situations, such as fires.
Broken Belts or Rollers: Wear and tear, poor installations, lack of maintenance, and strong impacts or force can lead to broken rollers and belts. Without repairs, the automatic doors are at risk of closing suddenly, which can cause injuries and further damage.
Worn Motors: Old or outdated motors and doors that experience excessive usage and heavy traffic are susceptible to early wear. Signs of a worn motor include loud or unusual noises, slow or fast closures, and vibrations when opening or closing.

Why Choose Delet for Your Automatic Door Repair

Our team upholds high standards of excellence, providing personalized customer service and reliable repairs.

We use professional grade equipment and tools, quality replacement parts, and the latest technologies to guarantee long-lasting solutions. Delet is a business you can depend on with same-day repairs and 24/7 emergency services.

Service for All Major Automatic Door Brands

Delet’s technicians are trained to diagnose and repair automatic door systems from every leading manufacturer. We carry replacement parts for the most common brands and can source components for legacy systems.

Brands we serve

Automatic doors: TORMAX, Stanley, Besam, ASSA ABLOY, Horton, Dorma
Door closers: LCN, Norton, Sargent, Yale, Allegion
Hardware: Schlage, Corbin, Russwin

Whether your system is a current-generation TORMAX or a legacy Besam unit, we have the knowledge and parts to restore it to spec.

Automatic Door Repair Cost in Toronto & GTA

Repair costs vary based on the fault, door type, and parts required. Below are typical ranges for the most common commercial automatic door repairs in the Toronto area.

Repair Type	Typical Cost (CAD)
Sensor replacement or recalibration	$150 – $350
Belt or roller replacement	$200 – $450
Track realignment or replacement	$250 – $600
Motor repair or replacement	$350 – $900
Emergency call-out surcharge	$150 – $250
Full door system overhaul	$800 – $2,000+

All estimates are free, on-site, and no-obligation, you’ll know the cost before any work begins.

Tip: Preventive maintenance contracts typically cost 30–50% less than equivalent reactive repairs over a 12-month period. Ask about Delet’s maintenance agreements when you book.

Automatic Door Maintenance Contracts

Reactive repairs are more expensive than preventive ones. Delet offers automatic door maintenance contracts for commercial properties that want consistent performance, reduced downtime, and priority emergency response.

What a maintenance agreement includes:

Scheduled inspections (quarterly or bi-annual)
Lubrication and adjustment of all moving parts
Sensor calibration and safety testing
Track and belt inspection
Priority dispatch for emergency calls
Documented service reports for compliance records

Maintenance contracts are available for single-site and multi-site properties. Contact us to discuss a plan for your building.

Should You Repair or Replace Your Automatic Door?

Not every automatic door issue requires a full replacement. Here’s a general guide:

Repair is usually the right call when:

The motor, sensors, or belts are worn but the frame and track are sound
The issue is isolated – a single component failure
The door is under 15 years old
The door operates correctly after a reset or adjustment

Replacement may make more sense when:

The door has reached end-of-life and parts are discontinued
Structural damage to the frame or track makes repair uneconomical
Energy efficiency or ACA compliance upgrades are required
Repeated repairs have accumulated to near replacement cost

Delet will always give you an honest assessment — we’ll recommend repair when it makes sense and replacement when it doesn’t. We also handle automatic door installation if replacement is the right move.

How much does automatic door repair cost in Toronto?

Most automatic door repairs in Toronto range from C$200–C$800 depending on the issue and door type. Sensor replacements and belt repairs are typically on the lower end; motor replacements or track overhauls are higher. Delet provides a free on-site estimate before any work begins — no surprises.

Do you repair automatic doors that are stuck open or stuck closed?

Yes, both are common emergency calls. A door stuck open is a security risk; a door stuck closed blocks access. We treat both as priority situations and can typically respond within 2–4 hours across the GTA.

Can you service automatic doors outside of business hours?

Yes. Delet offers 24/7 emergency automatic door repair. We also offer scheduled off-hours service for repairs that can’t interrupt operations during the day.

Do you offer automatic door maintenance contracts?

Yes. We offer scheduled maintenance agreements that include regular inspections, lubrication, sensor calibration, and priority emergency dispatch. These are available for single-site and multi-property accounts.

Are your technicians certified to work on automatic doors in Ontario?

Yes. All Delet technicians are licensed, WSIB-compliant, and trained on automatic door systems from all major manufacturers, including TORMAX, Besam, Horton, Stanley, and Dorma.

How long does a typical automatic door repair take?

Most commercial automatic door repairs take between 1 and 3 hours. Simple sensor replacements or recalibrations are often done in under an hour. Motor replacements or full system overhauls can take half a day. In most cases, we carry common parts on the truck and complete repairs in a single visit.

What types of automatic doors do you repair?

We repair all commercial automatic door types: automatic sliding doors, automatic swing doors, automatic revolving doors, automatic folding doors, low-energy swing doors, and high-speed industrial doors. If it’s a commercial automatic door in the GTA, we service it.

My automatic door is making a grinding or clicking noise, is that an emergency?

Unusual sounds usually indicate worn rollers, belt wear, or motor strain. It’s not always an emergency, but it’s a warning sign. Left unaddressed, these issues accelerate component wear and can result in sudden failure. We recommend booking a same-day or next-day inspection before the door fails completely.

Do you provide service records for compliance?

Yes. Every repair is documented with a written service record that includes diagnosis, parts replaced, and post-repair test results. Suitable for building compliance files, insurance records, and ACA documentation.

Automatic Door Repair Across Toronto & the GTA

Delet responds to automatic door repair, sliding door repair calls across the Greater Toronto Area, including Toronto, Mississauga, Scarborough, Etobicoke, North York, Brampton, Vaughan, Markham, Richmond Hill, Oakville, Burlington, Ajax, and Pickering. Same-day and emergency service available across all service areas.

Licensed, Insured & Compliance-Ready

WSIB Compliant: All technicians covered under Ontario Workplace Safety & Insurance Board
Licensed & Insured: Fully licensed commercial door technicians with liability coverage
ACA Compliant: All work performed to Accessible Canada Act standards
Fire Code Adherent: Repairs comply with Ontario fire code requirements
Documented Service Records: Written documentation provided after every repair for compliance files
All Major Brands: TORMAX, Stanley, Besam, ASSA ABLOY, Horton, Dorma & more

What Customers Say

“Our hospital’s main entrance stopped working at 6 AM. Delet had a technician on-site by 8 AM and the door was fully operational before the first patient arrived. Exceptional response.”
— Facilities Manager, Toronto-area Medical Centre

“We have five retail locations across the GTA. Delet handles all our automatic door service — they’re fast, consistent, and their technicians actually know the systems.”
— Regional Facilities Coordinator, National Retail Chain

What to Expect When You Call Delet

Getting your automatic door repaired shouldn’t be complicated. Here’s how it works – from first call to fully operational door:

Documentation Provided — You receive a service record suitable for compliance files, insurance records, and ACA documentation.
Call or Book Online – Reach our dispatch team 24/7. Describe the issue and we’ll confirm availability. For emergencies, we typically respond within 2–4 hours across the GTA.
Technician Arrives On-Site – Our licensed technician arrives fully equipped with diagnostic tools and the most common replacement parts for all major brands.
Free On-Site Diagnosis -We assess the fault, identify the root cause (not just the symptom), and give you a transparent quote before touching anything.
Repair Completed in a Single Visit – In most cases, we carry the parts needed on the truck and complete the repair on the spot. No waiting on parts orders, no return visits.
Post-Repair Safety Testing – We run full operational and safety tests before signing off – including sensor sweep, speed calibration, and manual override verification.